Does Pine-Sol Disinfect Hardwood Floors? Truth Revealed

Hey there! Some links on this page are affiliate links which means that, if you choose to make a purchase, I may earn a small commission at no extra cost to you.!

Hardwood floors are certainly an adornment in the house, but maintaining them and keeping them clean is as much of a job.

As times have changed and people have become more concerned about cleanliness and germs, it is very important to use a disinfectant in your house.

It is good if you’re also wondering does Pine-sol disinfect hardwood floors.

Pine Sol is super-efficient in disinfecting hardwood floors. It has all the qualities of a high-quality disinfectant which enables it to clean and disinfect your hardwood floors properly. Besides, the mild texture does not scratch or cause color-loss in your hardwood floors.

Is Pine Sol An Effective Wood Disinfectant?

Does Pine-Sol Disinfect Hardwood Floors? | Is Pine Sol An Effective Wood Disinfectant?

Pine sol is a proven and effective wood disinfectant that keeps germs away from the surface. Hardwood floors can be easy to maintain if you follow a proper routine.

A common mistake people make is that they get fooled by the appearance of the wood and think it doesn’t require cleaning.

The shade of wood color might vary, but all of them have this specific attribute of hiding us from the naked eye.

If you don’t pay close attention, there is a high chance that you will miss it. Ignoring it can cause even more damage as germs might start to fester infections on the surface. Hence, it is crucial to disinfectant timely.

You might be confused as there are many so-called disinfectants available on the market. But you need not worry as we’ve short-listed the most efficient product for you below.

But before moving, I want you to check out the safe disinfectants for hardwood floors also which I bet you haven’t used on wooden surfaces yet.

Pine Sol is one of the best-selling products on the market and is a superb disinfectant for wooden surfaces.

Often, cleaners and disinfectants are not suited for surfaces and finishes. You might’ve encountered situations where acid-based cleaners and disinfectants ruined oil-finished surfaces.

But thankfully, this is not the case with Pine-Sol, as it is a very mild disinfectant suitable for all types of surfaces.

Coming towards its effectiveness, it has been tested on different types of wood, and the number of bacteria, infections, and viruses noticed before and after.

It has come out successful in all tests and is a verified disinfectant.

Moreover, it does not damage porous wooden surfaces as most disinfectants do. They usually seep into the mores, making the wood swell and losing its original form.

Instead of disinfecting, this causes molds to build and welcomes even more infections.

But Pine Sol is very gentle on your wooden belongings and an effective disinfectant that you must have in your house.

However, if you are a home warrior who prefers cleaning using natural products, I have written a whole blog on how to disinfect hardwood floors naturally that I highly encourage you to go through.

What Bacteria Is In Pine-Sol?

What Bacteria Is In Pine-Sol?

Pine Sol contains many types of bacteria including Pseudomonas aeruginosa. During covid, many of these bottles had to be recalled as the Pseudomonas aeruginosa bacteria was stated to be dangerous for people with weaker immune systems.

But worry not, as only some scented types were recalled and claimed to be dangerous (causing infections that require medical treatment). If you are using regular Pine-Sol, it is completely safe to use.

What Type Of Disinfectant Is Pine-Sol?

Pine-Sol is a comprehensive disinfectant made from 8–12% pine oil, 1-5% sodium petroleum sulfonate, 3-7% alkyl alcohol ethoxylates, and 1-5% isopropyl alcohol.

The active ingredient in Pine-Sol is pine oil, which has natural disinfectant properties. Pine oil is a phenolic compound that can penetrate and destroy the cell walls of microorganisms, preventing them from reproducing and causing infection.

In addition to pine oil, Pine-Sol also contains several other ingredients that contribute to its disinfectant properties. These include sodium petroleum sulfonate, alkyl alcohol ethoxylates, and isopropyl alcohol.

Sodium petroleum sulfonate is a surfactant that helps to emulsify oils and dirt, allowing the pine oil to penetrate and disinfect surfaces.

Alkyl alcohol ethoxylates are also surfactants that help to dissolve and remove dirt and grime. Isopropyl alcohol is a solvent that can dissolve and remove some types of bacteria and viruses.

Overall, Pine-Sol is an effective disinfectant that can be used to kill a wide range of microorganisms on surfaces in homes, hospitals, and other settings.

However, it is important to follow the instructions on the label and use Pine-Sol as directed to ensure that it is effective and safe.

How To Clean Properly With Pine Sol Disinfectant?

If you want your wooden items to remain safe from infections and clean, Pine-Sol has your back.

But you might not be cleaning properly. You can use the best disinfectant in the world, but it is of no use if you are not cleaning it the right way.

So if you’re also wondering about the right way to clean your wooden items, here is the proper method to do so:

  1. If you are cleaning the floor, you could use a vacuum to take care of all the dry dust and residues on the floor.
  2. Once you’re done vacuuming, take a bucket and add a quarter cup of Pine-Sol for 1 gallon of water and mix it well.
  3. Use a mop or Swiffer to thoroughly wipe the floor and apply the solution on the entire surface.
  4. Afterward, you can use a scrubbing brush if the floor is too dirty. This will remove all the dirt and grime stuck between the flooring boards.
  5. If you are cleaning a wooden item, dampen a cloth with lukewarm water and wipe the wooden item thoroughly. It is important to remove any crusted or layered dust so you can work your way to the surface.
  6. Use a paper towel to wipe the surface dry. This will remove any stickiness which is not visible to the naked eye.
  7. Make sure to clean the corners and edges properly. Good scrubbing can prevent dust and grime from accumulating in the intersection points and under the corners.
  8. Spray a homemade polish onto the table and try to cover the entire surface.
  9. Rub the solution on the table to polish it. You may use kitchen towels or a clean, dry cloth.
  10. Work your way in circles and move along the grain of the wood. Doing so would eliminate any chances of scratching the surface and allow the polish to settle.
  11. Use a dry paper towel and gently rub the entire surface 2 to 3 times. This will remove any extra moisture and lock in the shine your wooden floor has just achieved.
  12. Give a different look to the corners and hard-to-reach areas to ensure you got everything.

How Much Pine-Sol Do I Dilute For Disinfecting?

How Much Pine-Sol Do I Dilute For Disinfecting?

To get the best result, you must dissolve a quarter cup of pine sol in one gallon of warm water.

This solution will ensure that you do not get a too-harsh or too-mild disinfectant for your hardwood floors.

When using Pine-Sol as a disinfectant, it is important to dilute it properly to ensure that it is effective and safe for use.

As mentioned above, the recommended dilution for disinfecting with Pine-Sol is a quarter cup of Pine-Sol per one gallon of warm water.

This solution is appropriate for most surfaces, including hardwood floors, and will provide an effective level of disinfection without causing damage to the surface.

Is Pine Sol Useful Against Coronavirus?

Is Pine Sol Useful Against Coronavirus?

Pine Sol can kill coronavirus easily, but you might not have known this, and there is a good reason for that.

Pine-Sol has yet to market this claim, mainly because it has to be EPA approved, and for that to happen, approval of that change must be registered in 50 states.

Hence, it can be a month or two before you start seeing the Covid-19 killer claim on the packaging.

However, if you already have older versions of the product, rest assured as they work as excellent disinfectants against Covid-19 Virus.

This is mainly because the formula is still the same, but being a quality disinfectant for wooden surfaces, it was already able to combat the Virus.

Is Pine Sol A Degradable Disinfectant?

Pine-Sol is a very eco-friendly company striving to improve the environment; hence, the products are all biodegradable.

All their cleaners are eco-friendly, so you don’t have to worry about harming the environment when using them.

Hence, it is a sensible decision to start disinfecting all the wooden surfaces in your house with Pine Sol today so you can eliminate any chances of disease or infections in your home.

Takeaway

If you do not disinfect your wooden surfaces regularly, you might be welcoming termites and other infestations.

Hence, it is best that you start cleaning wooden floors and items immediately. However, if you are confused as to which product you should choose, Pine Sol Disinfectant is your best option.

Sharing Is Caring!

Leave a Comment